If you are doing serious fabricating in steel, aluminum or stainless steel
then you need power and lots of it. Whether it's an important, large project
or a day-in, day-out production process the MicroCut 875S with its 55 amps
of raw cutting power is up to the task!
Out Customers have found plenty of uses for the MicroCut875. Some common ones are implement repairs and modifications, custom aluminum truck beds, and heavy marine fabrication. These users prefer the MicroCut 875 because it has the power - and the duty cycle - for heavy cutting all day long. If you need to turn a dumpster into metal corn flakes, then this is the tool for you!
The MicroCut 875S is based on the MicroCut 625s inverter technology, proven in the field since 1998. But we put the machine on a diet increasing the power by 37% but keeping the weight the same, making it easy to take this cutter right to the job. And a 20 ft cutting torch will allow you to get up on top of equipment if thats where the cutting needs to take place.
A machine like the MicroCut 875S lets you redefine production and fabrication techniques. The possibilities are truly staggering!
Just feed it 220 volt power and clean compressed air and it will easily blast through Ύ solid steel plate at 7 ½/min and severance cut 1 1/8 steel. The arc is ignited without high frequency, extending consumable life while at the same time eliminating any interference with computers, TVs or telephones. And it features automatic arc re-ignition for cutting expanded metal.
For all its power, the MicroCut 875S is easy to master. Its infinitely adjustable
power is easily tamed for even delicate tasks on mild, stainless or high carbon
steel, aluminum, brass, copper, galvanized, or rusty or painted plate.
Do you need a MicroCut 875S? If your work involves metal, and you can visualize the need for this tool, the answer is probably yes. The MicroCut 875S . . . it could change the way you think about metal.