Plasma Cutters
MicroCut
625
HTP takes plasma
cutting technology one step further with the new
Micro Cut 625. With our new inverter technology,
the Micro Cut 625 weighs in at only 39 pounds.
But it packs a whopping 40 amps of high tech
cutting power in its compact cabinet - allowing
you to severance cut 5/8" steel!
Infinite amperage adjustment means you will have
no problem keeping the raw cutting power of the
Micro Cut 625 under control. Dial it down to 10
amps for intricate cutting on light gauge sheet
metal. Crank it up to 40 amps for serious frame
work, bracket building, or whatever fabricating
job you may have in mind. Whether it's steel,
aluminum, stainless steel or any other metal that
conducts electricity, the Micro Cut 625 will
slice through it like a hot knife through butter.
Inverter technology packs all this power into a
cabinet which measures only 14 1/2" high, 23
1/2" long, and 9 1/4" wide, so it won't
take up a lot of room in your shop. Weighs only
39 lbs. which means you can take this cutter
right to the job. If you need to get on top of a
combine or a semi-trailer, you can do it with the
Micro Cut 625.
The plasma torch and ground cable feature a quick
disconnect design, making it possible to remove
them without any tools, for quick storage and
portability. Additionally, due to the superior
design of the plasma torch, consumable parts last
longer than standard plasma torches. Also, this
cutter features instant arc starting without high
frequency, so you will be able to start your arc
right through rusty or painted surfaces, while
reducing the possibility of damaging an on-board
computer.
Inverter technology is efficient. It only draws
30 amps on 220 volt power, so you can plug it
into almost any 220 volt outlet. When you compare
the Micro Cut 625 to the other cutters on the
market, you'll see there is no comparison.
.
| Primary Voltage (Volts) |
220 |
| Primary Amperage (Amps) |
30 |
| Cutting Current (Amps) |
10 to 40
Infinitely
Variable
|
| Open Circuit Voltage
(Volts DC) |
280 |
| Cutting Voltage (Volts
DC) |
110 |
| Quality Cutting Capacity |
1/2" |
| Severance Cutting
Capacity |
5/8" |
| Duty Cycle |
60% @ 40 Amps |
| Weight |
39 lbs. |
| Size: |
|
| Length
Width
Height
|
23.5" 9.25"
14.5"
|
| Cutting Torch Length |
19 ft. |
| Ground Length |
10 ft. |
| Plasma /Cooling Gas
Pressure |
60 - 75 psi |
| Plasma/Cooling Gas
Volume |
4.25 cfm |
 |
|
. 
MicroCut
625
#25625-45
|
|
|
