Auto Body Tools
|HTP Stud Setter
Pull dents with professional results...
and a whole lot more! This completely portable unit lets you
work anywhere. Tests in bodyshops show that the Stud Setter can
reduce labor cost by 40% to 80%.
Attach the tips for stud welding, insert studs, pull the trigger and
electrically weld the stud to the dented panel. Attach the Slide Hammer
to the stud and pull the dent. Or attach a row of studs and use a clamp
and "Come Along" for big dents. Each stud provides about
500 pounds of pull strength, but can be easily ground off without heat
distortion. The Stud Setter makes quick work of hail dents and door
Weld Studs to cold-rolled, high strength, galvanized and stainless
steels- all without making holes or removing inner panels.
Another use for your Stud Setter is the installation of trim riverts.
Many late model cars require these fasteners. Simply attach the trim
rivet tip, place a trim rivet in the magnetic tip, hold the gun tip
to your scribed line, pull the trigger, and "ZAP", you're
On the vechicle, you can shrink stretched metal with clean instant
electric heat exactly where you want it, hammer and cool with a wet
rag - continue until done. Get rid of " oil can" areas and
reduce high spots. It's great for hard to reach places, overhead or
at an angle, on 26 gauge through 16 gauge.
Everything you need comes with the Stud Setter... and is all packaged
in a convenient sturdy steel service tray.
A great buy even if it did one job well...an increadible value to you
because it does three jobs extremely well. Complete step by step instructions
(See #12015 if you own a MIG before purchasing this tool.)
|1 HTP Stud Setter
1 Slide Hammer
1 Stud Welding Tip
1 Steel Service Tray
|1 Box 250 Studys
1 Box Trim Face Rivets
1 Spot Weld Tip
1 Trim Rivet Tip
Stud Setter replacement tips are
also available individually:
#12012- Shrinking Electrode for Stud Setter
#12013- Stud Welding Electrode for Stud Setter
#12014- Trim Electrode for Stud Setter
HTP Stud Setter
Stud Setter Kit
Pull dents with professional results!
This is just like our 12010 Stud Setter Kit- allows you to pull
dents without drillimg holes. Simply electrically weld the stud
to the dented panel, attach the slide hammer, and pull the dent!
It's that simple! Each stud provides 500 lbs of pulling power.
With optional accessories you can also weld trim rivets and shrink!
The entry level stud setter kit includes the Stud Setter Gun,
slide hammer, stud welding tip, 100 studs, and steel tray!
Entry Level Stud
|HTP Dent Puller Kit
Originally built for the bodyshop
and now available to you to get professional results at home.
It works so easily anyone can lift out dents and save hundreds
in repair bills. Here's all you do. Set your HTP or other MIG
to proper heat range. Install your stud weld nozzle (#15007),
place a stud in the guide, hold gun and nozzle at an angle so
that the stud is 90 degrees to the work surface. In spot weld
mode just pull the trigger and you've set the stud.
Now attach the slide hammer to the stud and
pull, or put several studs on and use other clamps and pull
divice. The perfect accessory for those hard-to-pull dents.
No more drilling hole: a real solution, not a patch. you
won't know how you did it! The HTP Dent Puller Kit comes
complete with slide hammer, 500 studs and stud welding nozzle.
HTP Dent Puller Kit
|HTP Spot Mill
HTP Spot Mill- Imagine the best
spot weld removal tool you can. It would have to drill out spot
welds quickly and be able to remove spot welds without drilling
through both panels. It would have to be easy to start, without
a center punch and not walk around the panel. It would have to
have a long lasting drill bit. Well you've just imagined the
HTP Spot Mill. This unique tool has a hardened cobalt steel bullet
point drill bit. It's actually more like a bit found in a Bridgeport
milling machine. The depth of cut is set by turning the adjusting
ring, so you can set the tool to only cut through the upper panel.
The high torque, low RPM drill motor cuts out spot welds quickly,
without overheating the drill bit which results in long drill
life. Best of all, with the HTP Spot Mill, you can remove spot
weld without having to access both sides of the panel. You know
what a problem spot weld removal is. The HTP Spot Mill solves
that problem quickly, easily and efficiently. The HTP Spot Mill
- the spot weld removal tool you've been waiting for.
#90150 - HTP Spot Mill - includes
rugged molded case, 4 replacement cutting bits, regulator
#90151 - Replacement 5/16" Cutting Bit
for HTP Spot Mill
HTP Spot Mill
HTP Spot Weld
(HTP Spot Weld
HTP Spot Weld Drill Bits - are made of top quality, West German tool steel. This high-speed steel is mixed with a special cobalt alloy (EMO5-CO5), resulting in drills that can be expected to last twice as long as standard high-speed steel bits. Tests in our 90150 HTP Spot Mill (see above) have resulted in over 100 spot welds removed. These advanced HTP drills also work great in any other spot weld cutter.
Measuring 1 1/4" long x 5/16" diameter, they can be used in any drill which runs between 700 to 1800 rpm. Of course, as with any cutting tool, use of a cutting oil will greatly increase the life of the tool. Once you use an HTP Spot Weld Drill, you'll never go back to hole-saw-type cutters again.
A) 90151 -10 - This is the HSSE bit which contains the special cobalt alloy - lasts twice as long as HSS bits. This bit features a 10mm diameter cutting face.
B) 90151 – Same as above, but with an 8mm diameter cutting surface.
C) 90151-TIN - You know these bits are different the minute you look at them. We took our HSSE cobalt alloy bit and coated it with space-age Titanium, which is what gives the bit its gold color. The durable, titanium coating on these bits makes them last three times longer than our 90151 HSSE cobalt bit.
D) 90151-TICN - This is the top of the line bit - Titanium Coated and Carbon Nitrited. This exceptional coating is extremely hard while offering a very low coefficient of friction, so it runs cool. The bit’s purple color comes from the carbon nitriting process, which makes this bit last four to five times longer than the standard HSS bit.
E) 90151-3 – This is truly the top of the line. If you are working on late model, uni-body vehicles (Daimler/Chrysler, Porsche, Audi, Volvo, BMW, just to name a few) using very high strength, extremely hard Usibor or BTH steel, then you need this cutter or a plasma cutter to cut through these exceedingly tough, ultra-hard materials. This spot weld drill bit features a special, three-fluted design and combines all of the benefits of TiN, TiAN, and TiCN coatings. Watch it cut through these unusually hard steels while other drill bits just dull. Not recommended for use in a drill, but are designed specifically for specialized spot weld cutting tools.
|HTP Spark Guard
We sell lots of them, because
they work great! All it takes is one pitted windshield or burned
interior, and this welding blanket would have paid for itself.
Made from high quallity, fire-resistant material, this full 52" x
50" safety blanket deflects spatter and sparks from the
job area and co-workers it protects. Convenient magnetic strips
are sewn into 3 sides of the blanket, making it safe and easy
to attach to your vehicle or project. We recommend this fine
accessory wherever sparks are found: grinders, welders (MIG,
stick, gas, etc.).
Back to Top
HTP Spark Guard
|HTP Quick Spot
Now you can make factory looking
spot welds quickly and easily with the HTP Quick Spot. This 220
volt powerhouse makes rust repairs and panel repairs a snap.
The HTP Quick Spot produces virtually no warpage. Finishing work
is minimized because no metal is added in the welding process.
You don't have to worry about pitting windshields or burning
up interiors because the HTP Quick Spot eliminates spatter. Best
of all, the HTP Quick Spot requires no special welding skill
to operate - just squeeze the handle together and weld, it's
that simple. The Quick Spot has a wide variety of welding tongs
available to make sure you can tackle just about any welding
job. We recommend the Quick Spot for the sophisticated home shop,
body shop, sheet metal fabrication shop and antique restorer.
Back to Top
HTP Quick Spot
Call us at 800-USA-WELD (800-872-9353) for more information or to place an order