Autocrafter Kit
MIGs and plasma
cutters are the easiest and best ways to weld and
cut most metals in most situations. But there's
still a place for an Oxy-Acetylene torch.
Our Autocrafter Kit includes everything
you need to get started. The kit is made in the
USA, with quality brass and stainless steel
construction throughout for durability. UL
approved and excellent torch balance to prevent
operator fatigue. Gas regulators have easy to
read, two-inch gauges.
With optional tips, the
Autocrafter is able to weld up to 1 1/4"
thick steel, or cut to six inches. Complete Kit
includes:
- Oxygen Regulator
- Acetylene Regulator
- Welding Handle
- Cutting Attachment &
Tip
- Welding Tip
- Welding Hose
- Goggles
- Spark Lighter
Back
to Top
|
Autocrafter Kit
#90200
|
Clecos
For fabricators
and racers, nothing works better to hold metal in
place prior to welding than Clecos. They're
actually removable rivets. Place the panel in
position, drill a 1/8" or 3/16" hole,
and using the installation tool, insert the Cleco
thru the hole. The two panels are now tightly
held together. Clecos are reusable, and they'll
be your "third, fourth and fifth hands"
for years to come. Kit includes ten 1/8"
clecos, ten 3/16" clecos, two edge holding
clecos and the installation tool. Comes complete
with handy carrying case.
Back to Top
|
Clecos
#99160
.
|
HTP
Maghold
The HTP Maghold is
an indispensable tool for chassis and sheet metal
fabricators. This handy tool will hold any piece
of tubing over 1/2" dia. at a 45°, 90° or
135° angle while you weld it into place. Also
works great on steel plate and square tubing.
Back
to Top
|
HTP
Maghold
#90180
.
|
Wire Cleaner
This handy gadget
clamps onto your wire feed and cleans the wire
before it enters the gun. Increases liner life,
prevents bird's nesting, keeps welds clean.
Back
to Top
|
Wire
Cleaner
#12026
.
|
HTP Shrinking
Attachment
A must for
bodywork, this incredible accessory screws into
your swan neck. Use this tool to relieve stresses
in dented automotive panels after shaping and
dolly hammer work. This clean, safe electric heat
alternated with cooling of the panel will bring
the molecules of steel back into shape as befor
the damage occurred. Pays for itself in just one
small job. Other brand welders can be fitted,
too. Call our free hotline, 1-800-USA-WELD now.
We'll let you know if your MIG can accept this
great tool.
Back to Top
|
HTP
Shrinking
Attachment
#15003
.
|
Nozzle Reamer
The only tool
specially designed to clean build-up and slag
from inside the welding nozzle. Scraping blades
expand inside the nozzle and remove build-up.
Frequent use can help extend the life of your
nozzles.
Back to Top
 .
|
Nozzle
Reamer
#12025
|
